RISCO Group LightSYS 2 User Manual
Page 13
Introduction
Page 13
o
Signal‐jamming detection
o
Programmable supervision time
o
Threshold‐level calibration
o
Tamper detection
o
Transmitter’s low battery detection
o
Transmitter supervision
o
Nominal center frequency: 868.65 MHz or 433.92 MHz
o
Can be installed inside or outside the LightSYS2 main enclosure
When using wireless zones, the LightSYS2 Wireless expansion modules respond to
different wireless detectors, such as:
o
Smoke detectors
o
Door contacts/Door magnet/universal transmitter/door contact +universal
o
Up to 16 rolling code 4‐button keyfobs
o
Double key panic keyfob
o
Flood detector
o
Shock detectors
o
CO detectors
o
Gas detectors
o
Glassbreak detectors
o
Internal and External PIR/PET and WatchOUT detectors
Partitions/Areas
Up to 4 independent partitions/areas
Any zone can be assigned to any partition/area
Each partition/area supports both zone sharing and cross zoning
Groups
Groups are combined zones within a partition/area that are used for partial arming.
Up to four groups of zones can be defined for each partition/area.
Group arming and setting is performed by using the function keys on the keypad,
smartphone or via the web (A, B, C, and D) or by SMS or keyfob. Each keypad key
represents a different group of zones.
Each zone can be assigned to any of the four groups
Users can arm any of the four groups individually