RISCO Group LightSYS 2 - Manual (Page 231)

Installer Event Log Messages
Page 231
Event Message Description
Conf. Z=xx Confirmed alarm occurred from zone XX
Conf. alarm P=y Confirmed alarm occurred in partition Y
Conf.holdup P=y Confirmed holdup occurred in partition Y
Confirm rs Z=xx Restore zone confirmed alarm
CP reset The control panel has reset
Dat set C=xx Date defined by user no. XX
Day A:P=y Daily arm on partition Y
Day Arm:p=y Daily Arm on Partition Y
Day b:p=y Arm by scheduler of group B on partition Y
Day c:p=y Arm by scheduler of group C on partition Y
Day d:p=y Arm by scheduler of group D on partition Y
Day dis:P=y Daily disarm on partition Y
Day hom:P=y Daily STAY or GROUP arming in partition Y
DC Restore Z=XX
DC trouble restore in Bus zone XX
DC Trouble Z=XX
DC trouble in Bus zone XX
Dis:P=y C=zz Partition Y disarmed by user ZZ
Dis: P=y KF=zz Partition Y disarmed by remote control ZZ
Duress P=y C=xx Partition Y duress alarm from user no. XX
DUST RST Z=xx
Dust trouble restore from WatchOUT DT Bus zone XXX
DUST Z=xx
Dust trouble from WatchOUT DT Bus zone XXX
EE AC.UPLOAD
Load new parameters from PTM accessory
Enter progrm Entering installer programming from keypad or configuration
software
Exit program Exiting installer programming from keypad or configuration
software
F.Tr OK Z=xx Trouble restore in fire zone no. XX
F.Trbl Z=xx Trouble in fire zone no. XX
Fire Zone=xx Fire alarm in zone no. XX
False code kp=y
False code due to 3 incorrect keypad attempts
False code kr=y
False code due to 3 incorrect Access Control attempts
False rest.kp=y
False code is restored for keypad
False rest.kr=y
False code is restored for key reader
Fault z=xx
Trouble in zone XX