RISCO Group LightSYS 2 - Manual (Page 171)

Installer Programming
Page 171
Event Description Default

CO Alert
CO (Carbon Monoxide) alert from a zone defined a
CO detector No

High Temperature High Temperature alert from a zone defined a
Temperature detector
No

Low Temperature Low Temperature alert from a zone defined a
Temperature detector
No

Technical
Alert from the zone defined as Technical No

Miscellaneous

Zone Bypass
Zone has been bypassed No

Periodic test
Follow Me test message will be established
following the time defined in the Periodic Test
parameter under the MS parameters No

Remote
programming
System is in remote installation mode No
Quick Keys Parameter Default Range

Restore Events
Choose the restore events that will be reported to each Follow Me
destination.
Event Description Default

Alarms

Intruder
Alarm
Intruder alarm in the system restored Yes

Tamper
Tamper alarm in the system restored No

Troubles

Main Low
Battery
Low battery indication from the LightSYS2 main
panel restored No

WL Low
Battery
Low battery indication from any wireless device in
the system restored No

Jamming
Jamming indication in the system restored No

WL Lost
Wireless device lost restored No