RISCO Group LightSYS 2 - Manual (Page 111)

Installer Programming
Page 111
Quick Keys Parameter Default Range
ZZ
Automatic Microwave Bypass No
Defines whether the MW channel will be bypassed or not while the
detector identifies trouble in the MW channel.
NO ‐ While detecting a problem in the MW channel it is not bypassed.
Alarm condition cannot be established until the MW channel is fixed.
YES ‐ Switches the detector to operate only in PIR mode in case of
MW trouble
ZZ
Green Line Yes
A feature that follows environmental guidelines by avoiding surplus
emission This feature defines the activation of the microwave channel
while the system is disarmed.
NO ‐ Green Line feature is disabled. MW is constantly activated.
YES ‐ Green Line feature is activated.
ZZ
Anti‐Mask Enable
Defines the operation of Anti Masking detection.
DISABLE ENABLE and behaves according to the settings defined in
quick keys
ZZ
ZZ
Arm/Disarm No
Defines the operation of the anti masking detection while the detector is
armed or disarmed
. .
NO – While armed or disarmed, anti‐mask behaves according to the
setting defined in quick keys
 ZZ 
above.
YES – While armed, anti‐mask is disabled. When detector is disarmed
Anti‐mask behaves according to the settings defined in quick keys
ZZ
.
ZZ
Self Test Remote
Used to test the detection technologies. In the event of a failed test, a Self
Test Trouble is created
REMOTE (Manual) ‐ The remote self test is performed by the system
when a user manually selects the Diagnostics option from the
Maintenance menu via the LightSYS2 User Functions menu
LOCAL (automatic) ‐ Once an hour, the detector automatically checks
that the detector’s channels are functioning properly.