RISCO Group LightSYS 2 - Manual (Page 207)

Using the Installer Non‐Programming Menus
Page 207
Chapter 5 Using the Installer Non-Programming Menus
This chapter describes the parameters and programming options available to the installer
that are not under the Programming Menu. .
Your LightSYS2 comes with a variety of selectable functions available to the installer, user
and Grand Master. This section lists the complete menu of installer‐configurable functions,
the most frequently used of which are described in detail in previous chapters of this manual.
The following table shows the installer‐configurable keypad operations.
Activities Menu
Activities
Keypad Sound
Chime
Keypad Chime—Allows user control (turning ON and OFF) of the current
keypadʹs internal sounder for any function involving the Chime feature.
Partition Chime— Allows user control (turning ON and OFF) of all
keypadʹs buzzers in the partition for any function involving the
Chime feature)
Buzzer On/Off
Used to control the (Turning ON and OFF) the current keypadʹs internal
buzzer during both Entry and Exit Delay time periods and all fire and
burglar alarms.
Follow Me
Follow Me
Define
Destination: Used to define (up to 16) Follow Me destinations according to its type:
Voice message, SMS or E‐mail. For more information, refer to page 167
Label: Identifying labels for the Follow Me destination. Fill in the labels according
to the instruction defined for user label on page 62
Terminate Follow Me
If Follow Me Destination(s) were chosen, their operation can be terminated. Use
this function when an alarm has been tripped and there is no need to utilize the
Follow Me feature.
Test Follow Me
Used to test Follow Me reporting.