RISCO Group LightSYS 2 - Manual (Page 232)

Installer Event Log Messages
Page 232
Event Message Description
Fire z=xx
Fire alarm in zone XX
Fire kp=y
Fire alarm from keypad (ID=XX) (keys 3 & 4)
Foil ok Z=xx Restore in foil (Day) zone no. XX
Foil Z=xx Trouble in foil (Day) zone no. XX
Forced P=y Partition Y is force armed
Found Z=xx Wireless zone found, zone no. XX
Func=xx C=yy Quick key function XX by user YY
Gas Alarm Zn=xx Gas (natural gas) alert from zone XX defined as a gas detector
Gas Rst. Z=xx Gas (natural gas) alert restored from zone XX defined as a gas
detector
GSM:GPRS PW ERR
Authentication password is incorrect
GSM:GPRS PW OK
Authentication password is correct
GSM:IP OK IP connection OK
GSM:IP Trouble IP address is incorrect
GSM:Mdl comm.OK Communication between the GSM/GPRS Module and the
LightSYS2 is OK
GSM: Module comm. Internal GSM/GPRS bus module trouble
GSM:MS OK
GPRS communication to the MS is OK
GSM:MS trouble
GPRS communication failure to the MS
GSM:NET avail. GSM network is not available
GSM:NET avai.OK GSM Network is available
GSM:NET qual.OK GSM Network quality is acceptable
GSM:NET quality The GSM RSSI level is low
GSM:PIN cod.err PIN code entered is incorrect
GSM:PIN code OK PIN code is correct
GSM:PUK Cod err PUK code required
GSM:PUK Code OK PUK Code entered is correct
GSM:SIM OK SIM Card in place
GSM:SIM trouble SIM card missing or not properly sited
H.Temp rst Z=xx High temperature alert restored from zone XX defined as a
temperature detector
High Temp. Z=xx High temperature alert from zone XX defined as a temperature
detector
HOM:P=y C=zz
Partition Y is armed in Stay mode by user ZZ