RISCO Group LightSYS 2 - Manual (Page 249)

EN 50131 and EN 50136 Compliance
Page 249
Appendix H EN 50131 and EN 50136 Compliance
Compliance Statement
Hereby, RISCO Group declares that the LightSYS2 series of central units and accessories are
designed to comply with:
EN50131‐1, EN50131‐3 Grade 2
EN50130‐5 Environmental class II
EN50131‐6 Type A
UK: DD243:2004, PD 6662:2004, ACPO (Police)
EN50136‐1‐1 and EN50136‐2‐1 :
ATS 5 for IP/GPRS; ATS 2 for PSTN
Signaling security: ‐ Substitution security S2
‐ Information security I3
EN50136 Compliance
IP and GSM modules are complying with the following standards:

EN50136‐1‐1

EN50136‐1‐1/A2

EN50136‐2‐1

EN50136‐2‐1/A1

EN50136‐2‐2:1998
PSTN complies with the following standards:

EN50136‐1‐2:1998

EN50136‐1‐3:1998

EN50136‐2‐2:1998

EN50136‐2‐3:1998

EN50136‐1‐4:1998

EN50136‐2‐4:1998
PSTN can be connected to Monitoring Station via any EN50136 compliant receiver,
which shall meet all requirements of securing messages.
When IP and/or GSM modules are in use, IP Receiver software is also in use. The IP
Receiver should be connected to automation software, which serves as the EN50136‐
2‐1 A1:2001 annunciator. If connection between the IP Receiver and the automation
software is lost, an error message will appear on the IP Receiver queue.