RISCO Group LightSYS 2 - Manual (Page 118)

Installer Programming
Page 118
2-Way PIR, Shock, Flood, Gas, Curtain, High Temperature, Zone Button,
WatchOUT and Wired IR Beam
Quick Keys Parameter Default Range
ZZ
Serial No.
The identifying 11‐digit number on the detector sticker
ZZ
Control
ZZ
Supervision No Yes/No
Determines if this zone will be supervised by the system expander
according to the time defined under the timer RX Supervision (see page
71)..
ZZ
LED Enable Yes Yes/No
Defines whether or not the LEDS operation mode is enabled
ZZ
Anti Mask (WatchOUT Only) No Yes/No
Defines the operation of Anti Masking detection and behaves according
to the settings defined in quick keys
ZZ
ZZ
Detection Mode 2.5 Min 2.5 min/ 2.5 sec
 Normal 2.5 Min  Fast 2.5 Sec
If automatic detection mode is enabled, designate here the polling
periodicity of alarm generating events.
ZZ
Sensitivity

Defines the visual sensitivity of the detector.
LOW  HIGH
LOW MEDIUM  HIGH MAXIMUM (WatchOUT only)

(For IR Beam) Defines the sensitivity of the detector (how long must
the beam transmission be interrupted to generate an alarm event)
LOW 900 mSEC MEDIUM 675 mSEC  HIGH 450 mSEC
MAXIMUM 225 mSEC