RISCO Group LightSYS 2 - Manual (Page 173)

Installer Programming
Page 173
Quick Keys Parameter Default Range

Disarm Stop Follow Me No Yes/No
YES: No follow me report during Stay arming for alarm or tamper
NO: Follow me report for alarm or tamper will be established during
Stay arming. (Default).

Disable Report at Stay No Yes/No
YES: No follow me report during Stay or Group arming for alarm or
tamper
NO: Follow me report for alarm or tamper will be established during
Stay arming.

Parameters
Allows to program parameters related to operation with the Follow Me

Follow Me Retries 03 01–15
The number of times the Follow Me phone number is redialed

Voice Message Recurrence 01 01–05
This number of times a voice message repeats itself when establishing a
call to a Follow Me number.

Follow Me Periodic Test 01–05
The Periodic Test enables you to set the time period that the system will
automatically establish communication to a Follow Me destination
defined with the Periodic Test event. (See page 160)

Cloud 01–05
Define here the server settings for communication with the LightSYS2
system

IP Address 01–05
The IP address or server name. If the LightSYS2 system is connected to
the RISCO cloud for self‐monitoring, then use: riscocloud.com.
Otherwise enter the IP address or name where the cloud server is located

IP Port 33000
The server port address