RISCO Group LightSYS 2 User Manual
Page 149
Installer Programming
Page 149
Quick Keys
Parameter
Default
Range
SIM Number
The SIM phone number. The system uses this parameter to receive the
time from the GSM network in order to update the system time.
SMS Center Phone
A telephone number of the message delivery center. This number can be
obtained from the network operator.
GSM Network Sensitivity (RSSI)
Disabled/Low/High
Set the minimum acceptable network signal level (RSSI level).
Options: Disabled (No troubles for low signal reception) / Low signal /
High signal
Prepay SIM
Allows programming parameters that will be used when a prepaid SIM
card is used in the system.
Get Credit by
Depending on the local network provider, the user can receive the credit
level of the prepaid SIM card by sending a predefined SMS command to
a defined number or by calling a predefined number through the voice
channel. The activation of the credit request can be done by the Grand
Master.
SMS Credit Message: Enter the message command as defined by
the provider and the provider’s phone number to which the credit
level SMS message request will be sent.
Voice Credit: Enter the provider’s phone number to which a call
will be established
Service Command: Enter the service command message as defined
by the provider
Phone To Send
The provider’s phone number to which the credit level SMS message
request will be sent to or a call will be established, depending on the
selection in the Get Credit by parameter.
Phone To Receive
The provider’s telephone number from which an automatic SMS credit
status message will be sent from.