RISCO Group LightSYS 2 - Manual (Page 153)

Installer Programming
Page 153
Quick Keys Parameter Default Range
MS Polling example:
When selecting MS 1 (IP Only), MS 2 (IP only) and split report option 1
st
Backup 2 nd (using the default primary, secondary and backup time
intervals), the report process will be as follows:
In a normal state:
Polling through the IP network using the IP module will occur every 30
seconds according to the primary time interval to MS 1 and every 3600
seconds (1 hour) according to the secondary time interval to MS 2.
When communication to MS 1 fails, polling occurs every 30 seconds
according to the backup interval to MS 2. When communication returns
to MS 1, polling reverts back to the secondary time interval and occurs
every 3600 seconds (1 hour) to MS#2
Radio (LRT)
Quick Keys Parameter Default Range

LRT (Long Range Transmission)
The LRT menu contains parameters for setting a system long‐range
radio communication network, using the Location Aided Routing
(LARS) protocol (LARS, LARS1, or LARS2) or E‐LINE protocol to
facilitate detailed event transmission to monitoring stations.

Account 0 0–00FFFF