RISCO Group LightSYS 2 - Manual (Page 187)

Installer Programming
Page 187
Quick Keys Parameter Default Range
 
Voice Module
 To specify the voice module expander parameters
1. Through the menu selection, the following display appears:
VOICE MODULE
TYPE=VOICE
2. With the cursor positioned at the TYPE field, use the key
to toggle and choose the VOICE option..
3. Press . The following display appears.:
ENTER R. PHONE
CODE: 00
4. Enter a remote phone code and press . The remote code is
used when calling the system from a remote phone.
 
Sounder
 To specify and configure a sounder (siren)
1. Through the menu selection, the following display appears:
OUT DOOR SIREN:
ID=1 TYPE=NONE
2. Use the or keys to position the cursor over the ID
number to which you want to assign and configure the siren.
3. With the cursor positioned at the TYPE field, use the key
to toggle and choose the siren option:

NONE

SIRN (Prosound A)

SIRN2 (ProSound B)

LUM8 (Lumin 8, See page 53)
4. Press . The partition display appears:
P=1234 S=1
Y...
5. Use the or keys and the key to assign that
partition to the siren.