RISCO Group LightSYS 2 - Manual (Page 199)

Installer Programming
Page 199
Description of 2‐Way Keyfob Options
Quick
Key
Option Description

Serial No The identifying 11‐digit number of the keypad
(display only)

Masking: Specifies the partitions that are controlled by
the specified keypad.
, 
Controls Panic Enable: Disable/enable the issue panic
alarm button

PIN code

UO Key 1: The button is used to operate a single utility
output

UO Key 2: The button is used to operate a single utility
output
UO Key 3: The button is used to operate a single utility
output

Sounder
The Sounder menu enables to define all parameters of external sounder that can be connected
to the LightSYS2 as a bus accessory.
The Sounder menu is divided into the following sub‐menus

Parameters

Lamp Times
Note
Access to this sub‐menu requires that a sounder device is installed on your site. For details,
see page 179
Quick Keys Parameter Default Range

Parameters
Use this menu to define all parameters of the siren. Note that some
parameters are only relevant to a specified siren.
Select a sounder and press .
Bus Sounder
 
Label
As appropriate, rename the sounder’s label, as per the key definitions on
page 62.