RISCO Group LightSYS 2 - Manual (Page 116)

Installer Programming
Page 116
Seismic
Quick Keys Parameter Default Range
ZZ
Sensitivity Normal
Defines the Seismic sensitivity of the detector.
LOW MEDIUM NORMAL HIGH
ZZ
Interference (Accumula‐ 10 Sec 10, 20, 40, 80 sec ‐
tion/Integration) Time
Defines the moving window of time in which the vibration signal is
accumulated (integrated). Detection is triggered when the accumulated
signal reaches a threshold value. Longer time causes higher detection
sensitivity.
ZZ
Explosion Sensitivity Normal
Defines the explosion sensitivity of the detector.
LOW MEDIUM NORMAL HIGH
ZZ
Temperature Sensitivity
Defines the sensitivity to temperature change.
LOW HIGH
ZZ
Self Test Remote
Used to test the detection technologies. In the event of a failed test, a Self
Test Trouble is created
REMOTE (Manual) ‐ The remote self test is performed by the system
when a user manually selects the Diagnostics option from the
Maintenance menu via the LightSYS2 User Functions menu
LOCAL (automatic) ‐ Once an hour, the detector automatically checks
that the detector’s channels are functioning properly.
ZZ
LEDS On
Defines the LEDS operation mode.
OFF ‐ Disables the LEDS operation.

ON – Enables the LEDS operation