RISCO Group LightSYS 2 - Manual (Page 206)

Installer Programming
Page 206

3A Power Supply
This menu enables to define or modify parameters of 3A switched power supply connected to
the LightSYS2 as a bus accessory. Up to 4 power supplies can be connected to the LightSYS2.
From the menu Select a power supply and press .
Quick Keys Parameter Default Range

Masking
Specifies the partitions that the power supply is assigned to.
Press to display the partition application screen:
P=1234 PS=1
YYYY
Use the key to toggle Y/N to set the partitions.

Control
Use this menu to define controls of the power supply. Use the key
to toggle Y/N for each option:

BELL/L.SPEAK: