RISCO Group LightSYS 2 - Manual (Page 150)

Installer Programming
Page 150
Quick Keys Parameter Default Range
 
SMS Message
When performing manual Credit Level check this message will be sent to
the provider in order to receive the SIM card credit. The message is
predefined (for example “BILL”) by your service provider.
* When using a service command this field is ignored.
IP
Quick Keys Parameter Default Range

IP
The IP menu contains parameters for the communication of the system
over the IP network.

IP Config
The IP menu contains parameters for the communication of the system
over the IP network
.

Obtain Automatic IP
Defines whether the IP address, which the LightSYS2 refers to, is
dynamic or static.

Dynamic IP
The system refers to an IP address provided by the DHCP.

Static IP
The system refers to a static IP Address.

Panel Port
The LightSYS2 Port address.

Panel IP (Only for Static IP)
The LightSYS2 static IP address

Subnet Mask (Only for Static IP)
The subnet mask is used to determine where the network number in an
IP address ends.