RISCO Group LightSYS 2 - Manual (Page 237)

Installer Event Log Messages
Page 237
Event Message Description
Soak fail Z=xx Zone XX has failed in the soak test
Spec. KP=y Special alarm from the from wireless keypad Y
Spk Trbl RS S=y Speaker low battery restore from siren Y
Spkr Trbl Sir=y Speaker low battery trouble from siren Y
Spkr l.bat S=y Speaker low battery trouble from siren Y
Spkr l.batrsS=y Speaker low battery restore from siren Y
Start exit P=y Exit time started in partition Y
STU=Y Line Rstr STU adapter Y line restoration
STU=Y Line Trbl STU adapter Y line trouble
STU=Y R.RESET STU adapter Y line restoration reset
Tamper BZE=y Tamper alarm from bus zone expander ID=Y
Tamper Kp=y Tamper alarm from keypad ID=Y
Tamper LRT Tamper alarm from long range transmitter
Tamper PS=y Tamper alarm from power supply Y
Tamper Siren=y Tamper alarm from wireless siren Y
Tamper UO=y Tamper alarm from utility output expander Y
Tamper Voice Tamper alarm from Advanced Voice module
Tamper WME=y Tamper alarm from wireless module expander Y
Tamper ZE=y Tamper alarm in zone expander ID=X
Tamper Zn=xx Tamper alarm from zone no. XX
Tech alarm Z=xx Alarm from zone XX defined as Technical
Tech rstr Z=xx Alarm restored from zone XX defined as Technical
TMP RS BZE=y Tamper alarm restore from bus zone expander ID=Y
TMP RS KP=y
Keypad tamper restore
TMP RS PS=y
Tamper alarm restore from power supply expander ID=Y
TMP RS UO=y
Tamper alarm restore from UO expander ID=Y
TMP RS VOICE
Tamper alarm restore from Advanced Voice module
TMP RS WME=y
Tamper alarm restore from wireless module expander ID=Y
TMP RS ZE=y
Tamper alarm restore in zone expander ID=Y
TMP RS ZN=xx
Tamper alarm restore on zone XX
TMP RST LRT Long Range transmitter tamper alarm reset
Tmp rst Siren=y Tamper alarm restore from wireless siren Y
Unbyp Box+Bell Box + Bell reinstated from bypass
Unbyps Zn=xx Zone no. XX is reinstated from bypass