Figures 6–27 – Altera Stratix GX Transceiver User Manual
Page 186
6–32
Altera Corporation
Stratix GX Transceiver User Guide
January 2005
GigE Mode MegaWizard
Figure 6–27. MegaWizard Plug-In Manager - ALTGXB (Page 3 of 9) - General (1)
Notes to
:
(1)
GigE protocol mode supports duplex, receiver-only, or transmitter-only operation modes.
(2)
Valid numbers: 1 to Max Channels available on the device. The Quartus II software automatically assigns the
channels to a transceiver block unless input/output pin assignments are made to the channel’s transceiver input
and output pins.
(3)
8 bits: single width
(4)
For more information, refer to the Stratix GX Analog Description chapter.
(5)
rxdigitalreset
: resets the digital blocks in the receiver channel. Each active receiver channel has its own digital
reset.
txdigitalreset
: resets the digital blocks of the transmitter channel. Each active transmitter channel has its own
digital reset.
rxanalogreset
: Resets the receiver’s analog circuits and the receiver PLL. Each active receiver channel contains
its own analog reset.
pll_areset
: Resets the entire transceiver block: all receiver and transmitter digital and analog circuits, including
receiver and transmitter PLLs.