Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 102)

Global Configuration Commands
Wavecom Custom Character Set +WCCS
©Restricted Page: 96 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.16 Wavecom Custom Character Set +WCCS
6.16.1 Description
This Wavecom proprietary command allows to edit and display the custom character
set tables. These tables are used by the "CUSTOM" mode of the +CSCS and the
+WPCS commands. In this "CUSTOM" mode, when the user enters a string, it is
converted into GSM alphabet using the custom to GSM table. In a similar way, when
the user requests a string display, the string is converted from GSM alphabet using
the custom alphabet and the custom alphabet extension tables.
6.16.2 Syntax
• If <mode>=0
Action command
AT+WCCS=<mode>,<table>,<character_range>[,<character_range>]
+WCCS: <character_number>,<characters>
OK
• If <mode>=1
Action command
AT+WCCS=<mode>,<table>,<character_range>[,<character_range>]
>
<characters><ctrl-Z>
OK
Read command
None
Test command
None