Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 694)

Fax class 2 Commands
Current Session Parameters +FDIS
©Restricted
Page: 146 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
26.10 Current Session Parameters +FDIS
26.10.1 Description:
This command allows the DTE to configure the capabilities used for the current
session.
The +FDIS unsolicited response reports remote capabilities.
The +FDCS unsolicited response reports current session capabilities.
26.10.2 Syntax
Action command
AT+FDIS=[<vr>][,[<br>][,[<wd>][,[<ln>][,[<df>][,[<ec>][,[<bf>]
[,[<st>]]]]]]]]
OK
Read command
AT+FDIS?
<vr>,<br>,<wd>,<ln>,<df>,<ec>,<bf>,<st>
OK
Test command
AT+FDIS=?
(list of supported <vr>s),(list of supported <br>s),(list of
supported <wd>s),(list of supported <ln>s),(list of supported
<df>s),(list of supported <ec>s),(list of supported <bf>s),(list
of supported <st>s)
OK
Unsolicited response
+FDCS: <remote_vr>,<br>,<wd>,<ln>,<df>,<ec>,<bf>,<st>