Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 442)

Short message Commands
List Message +CMGL
©Restricted
Page: 96 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
• For PDU mode
Action command
AT+CMGL=<stat>
+CMGL: <index>,<stat>,[<alpha>],<length>
<pdu>
[+CMGL: <index>,<stat>,[<alpha>],<length>
<pdu>[…]]
OK
17.13.3 Parameters and Defined Values
<da>:
destination address
string type
<toda>: type of address of <da>
145 international number
129 national number
<dt>: discharge time
string format: "yy/MM/dd,hh:mm:ss±zz"(Year [00-99], Month [01-
12], Day [01-31], Hour, Minute, Second and Time Zone [quarters
of an hour])
<oa>: originator address
string type
<tooa>: type of address of <oa>
145 international number
129 national number
<scts>: service center timestamp
string format: "yy/MM/dd,hh:mm:ss±zz"
(Year/Month/Day,Hour:Min:Seconds±TimeZone)
<fo>: first byte of SMS-DELIVER, SMS-SUBMIT or SMS-STATUS-
REPORT, for further information refer to document [1]
integer type
<pid>: protocol identifier
integer type
<index>: place of storage in memory
integer type