Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 754)

APPENDIXES
Technical Appendixes
© Restricted
Page: 48 / 80
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 APPENDIXES August 23, 2007
To use it, an alarm wake up has to be previously recorded by AT+CALA command
before switching to this mode.
To activate the Wireless CPU ® in this mode, use" AT+CPOF" command, when the
ON/OFF switch is LOW.
Deactivate this mode by placing the ON/OFF switch to HIGH or after alarm wake up.
3.1.2 Working Mode Features
The table below sums up feature availability in each mode.
Features
Alarm
Mode
Fast
Idle
Mode
Slow
Idle
Mode
Fast
Standb
y Mode
Slow
Standb
y Mode
Connected
Mode
Transfer
Mode
Alarm √ √ √ √ √ √ √
Wake-up Open AT ®
application on timer
events - √ √ √ √ √ √
GSM/GPRS paging (alert
from the network for
incoming call, incoming
SMS or incoming GPRS
data)
- √ √ - - √ √
SIM - √ - - - √ √
UARTs - √ - √ - √ √
USB - √ - √ - √ √
SPIs - √ - √ - √ √
I2C - √ - √ - √ √
GPIO - √ - √ - √ √
ADCs - √ - √ - √ √
Buzzer - √ - √ - √ √
Keypad - √ √ √ √ √ √
External IT - √ √ √ √ √ √
Flash led - √ √ √ √ √ √