Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 407)

Short message Commands
New Message Indication +CNMI
©Restricted
Page: 61 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
17.2 New Message Indication +CNMI
17.2.1 Description
This command selects the procedure for message reception from the network.
17.2.2 Syntax
Action command
AT+CNMI=<mode>,<mt>,<bm>,<ds>,<bfr>
OK
Read command
AT+CNMI?
+CNMI: <mode>,<mt>,<bm>,<ds>,<bfr>
OK
Test command
AT+CNMI=?
+CNMI: (list of supported <mode>s),(list of supported <mt>s),(list
of supported <bm>s),(list of supported <ds>s),(list of supported
<bfr>s)
OK
• For <mt>=1
Unsolicited response
+CMTI: <mem>,<index>
• For <mt>=2 and PDU mode
Unsolicited response
+CMT: [<alpha>],<length>
<pdu>