Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 85)

Global Configuration Commands
Commercial Feature Management +WCFM
©Restricted Page: 79 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
<resetFlag>: reset flag
0 The feature has not been modified since the last boot of
the product.
1 The feature has been modified since the last boot of the
product; a reset must be performed to take the
modifications into account.
6.7.4 Parameter Storage
The <FtrMask> parameter is stored in EEPROM without using AT&W.
6.7.5 Examples
Command Responses
AT+WCFM=2
Note: Display the feature status
+WCFM: "AAAA",0
OK
AT+WCFM=0,"0A00"
Note: Disable some features
OK
AT+WCFM=2 +WCFM: "0A00",1
OK
Note: Display the feature status Note: <resetFlag> parameter indicates if a reset is
necessary
A reset must be performed to take the modifications into
account.
AT+WCFM=1,"0003","1234567890ABCD
EF1234567890ABCDEF1234567890ABCD
EF1234567890ABCDEF" OK
Note : Enable features Note: The features are enabled (the password is correct)