Gprs commands – Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 280
GPRS Commands
GPRS parameters customization: +WGPRS
©Restricted
Page:
90 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 2
August 23, 2007
<class>:
GPRS or EGPRS multislot class number. Please refer to [6] and
table in "Notes" section for more information
0
deactivate EGPRS mode (in order to establish GPRS TBF)
only available for EGPRS enabled Wireless CPU
®
s and
<mode>=8
2
multislot class 2
8
multislot class 8
10
multislot class 10
<response>:
This parameter is returned in "AT+WGPRS?" response.
• for <mode>=0,1,2,3,5,6,7 and 9:
<response>=<parameter>
• for <mode>=4 and 8: <response>=<class>
<techno>:
technologies available on the used network
0
neither GPRS nor EGPRS features supported
1
only GPRS feature supported
2
EGPRS
feature
supported
14.2.4
Parameter Storage
The <cid> and <class> parameters are stored in EEPROM without using the AT&W
command.
The unsolicited network capability indication configuration is not stored in EEPROM,
even when using AT&W command.