Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 279)

GPRS Commands
GPRS parameters customization: +WGPRS
©Restricted
Page: 89 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14.2.3 Parameters and Defined Values
<mode>: Wavecom GPRS parameter
0 ATTACH-STATUS (the ME does not automatically perform a
GPRS attachment after initialization)
only <parameter> is used
1 PDP-INIT-STATUS (declares some PDP contexts liable to be
activated automatically after initialization by <mode>=2)
only <parameter> is used
2 sets ACTIVABLE automatically after init a define PDP context
only <parameter> and <cid> are used
3 PPP silent mode (PPP waits for PPP Client to start the dialog)
only <parameter> is used
4 definition of the GPRS multislot class. This parameter
represents the GPRS or EGPRS class chosen by the user to
perform power saving (by reducing TX /uplink time slots).
only <class> is used
5 Slow CONNECT for PALM ® OS (due to the delay of the
processing of PALM ® OS, the CONNECT is sent one second
after the dialing command request)
only <parameter> is used
6 PPP Filtering
only <parameter> is used
7 Automatic GPRS roaming inter-operator (ME automatically
reattaches itself to the network and reactivates its PDP
context by changing of operator when reaching border areas)
only <parameter> is used
8 Definition of the EGPRS multislot class (available for EGPRS
compatible Wavecom Wireless CPU ® s)
only <class> is used
9 GPRS/EGPRS network capability indication (available for
EGPRS compatible Wavecom Wireless CPU ® s)
<parameter>: requested operation for <mode> (except for <mode>=4 and 8)
0 disabled
1 enabled
2 only for <mode>=9: read GPRS/EGPRS network capability
<cid>: PDP context identifier
range: 1-4
integer type