Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 261)

Data Commands
Radio Link Protocol Parameters +CRLP
©Restricted
Page: 71 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
13.4 Radio Link Protocol Parameters +CRLP
13.4.1 Description
This command modifies the radio link protocol parameters used for non transparent
data transmission.
13.4.2 Syntax
Action command
AT+CRLP=[<iws>][,[<mws>][,[<T1>][,[<N2>][,[<ver>]]]]]
OK
Read command
AT+CRLP?
+CRLP: <iws>,<mws>,<T1>,<N2>,<ver>
OK
Test command
AT+CRLP=?
+CRLP: (list of supported <iws>s),(list of supported <mws>s),(list
of supported <T1>s),(list of supported <N2>s),(list of supported
<ver>s)
OK