Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 96)

Global Configuration Commands
Restore Factory Settings &F
©Restricted Page: 90 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.13 Restore Factory Settings &F
6.13.1 Description.
This command is used to restore factory settings from EEPROM.
6.13.2 Syntax
Action command
AT&F[<n>]
OK
Read command
None
Test command
None
6.13.3 Parameters and Defined Values
<n>: setting restore parameter
If <n> is not omitted and with a value different from 0, the
response is OK without any treatment.
0 restore factory settings
6.13.4 Parameter Storage
None.