Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 396
Phonebooks Commands
Settings of a Group +WPGS
©Restricted
Page:
50 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 3
August 23, 2007
16.10.3 Parameters and Defined Values
<mode>:
requested operation
0
read group settings
1
write group settings
<group index>:
index of a group
<restrict call>:
call restriction mode
0
all refused - incoming call is forwarded to the voice mailbox
or rejected like busy line (depends on network operator)
1
all accepted - incoming call is received (RING message is
displayed)
16.10.4 Parameter Storage
None.
16.10.5 Examples
Command
Responses
AT+WPGS=1,1,1
Note: Set restrict call to "All Accepted"
OK
AT+WPGS=0,1
+WPGS: 1
OK
Note: Command reads group 1 settings
Note: Group 1 all accepted
AT+WPGS=?
+WPGS: (0-1),(1-10),(0-1)
Note: Test command
OK