Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 131
Wireless CPU
®
Status Commands
Indicator Control +CIND
©Restricted
Page:
125 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 1
August 23, 2007
7.4.3
Parameters and Defined Values
<ind>:
ME indicator state for one <descr> parameter
integer type value, which shall be in range of corresponding
<descr> parameter
0
indicator is OFF or in a state which can be identified as "OFF"
state
1
indicator is ON or in a state that is more substantial than "OFF"
state
2-5
2 is more substantial than 1, and so on.
<descr>:
ME indicator description
"battchg"
battery charge level (0-5)
"signal"
signal quality (0-5)
"service"
service availability (0-1)
"message" message received (0-1)
"call"
call in progress (0-1)
"roam"
roaming indicator (0-1)
"smsfull"
SMS memory storage status in the MT (0-2)
0: memory location is available (either in the ME, or in the SM
or in both storage)
1: memory full in the MT (ME and SM)
2: one SMS has been received in the SC but the SMS selected
storage where this SMS is to be stored is full
7.4.4
Parameter Storage
None.