Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 81)

Global Configuration Commands
Features Management +WFM
©Restricted Page: 75 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.6.5 Examples
Command Responses
AT+WFM=2,"BI9001800" +WFM: "BI9001800",1,0
OK
Note: Dual-band mode 900/1800 is enabled
AT+WFM=0,"EFR" OK
Note: Disable the Enhanced full rate feature
AT+WFM=2 +WFM: "MONO900",0,0
+WFM: "MONO1800",0,0
+WFM: "MONO1900",0,0
+WFM: "BI9001800",1,0
+WFM: "BI9001900",0,0
+WFM: "MONO850",0,0
+WFM: "BI8501900",0,0
+WFM: "QUADBAND",0,0
+WFM: "EFR",0,1
+WFM: "HR",1,0
+WFM: "DTXDATA",1,0
+WFM: "DATA144",1,0
+WFM: "SIM3VONLY",0,0
+WFM: "SIM1V8ONLY",0,0
+WFM: "SIM1V8AND3V",1,0
+WFM: "SIMREMOVE",1,0
+WFM: "NOINTERRUPT",0,0
+WFM: "OFFWHENUNPLUG",0,0
+WFM: "INTERRUPT",1,0
+WFM: "SWITCHATT",1,0
+WFM: "CPHS",1,0
+WFM: "SIMSPEEDENH",0,0
+WFM: "LOCA",0,0
+WFM: "AMR",0,0
+WFM: "NT_6K",1,0
OK
Note : Get all <FtrID> status Note: The modified features have their <resetFlag>
parameter set to 1.