Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 339)

PLMN Commands
Operator List Management +WOLM
©Restricted
Page: 149 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
15.4.5 Examples
Command Responses
AT+WOLM=1,1,20812,"WM","WM PLMN"
Note: Add a new PLMN at location 1
OK
AT+WOLM=2,1 +WOLM: 1,20812,"WM","WM PLMN"
Note: Read the PLMN at location 1 OK
AT+WOLM=2,11
Note: Read the PLMN at location 11
+CME ERROR: 21
Note: Invalid index
AT+WOLM=1,1,20812,"WM1","WM1 PLMN"
Note: Modify an existing PLMN
OK
Note: Done
AT+WOLM=?
Note: Test command
OK
AT+WOLM?
Note: Interrogate current list
+WOLM: 1,20812,"WM1","WM1 PLMN"
OK
Note: List of the created PLMNs in flash
AT+WOLM=1,,20813,"PLMN2","PLMN2
LONG"
Note: Add a new PLMN at available location
OK
or
+CME ERROR: 20
Note: <Err> returns if no more PLMNs can be
added
AT+WOLM=0,1
Note: Delete an entry at location 1
OK
AT+WOLM=0,11
Note: Delete an entry at location 11
+CME ERROR: 21
Note: Invalid index