Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 275)

GPRS Commands
GPRS Mobile Station Class +CGCLASS
©Restricted
Page: 85 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14 GPRS Commands
14.1 GPRS Mobile Station Class +CGCLASS
14.1.1 Description
This command is used to set the MT to operate according to the specified GPRS
mobile class.
14.1.2 Syntax
Action command
AT+CGCLASS=<class>
OK
Read command
AT+CGCLASS?
+CGCLASS: <class>
OK
Test command
AT+CGCLASS=?
+CGCLASS: (list of supported <class>s)
OK
14.1.3 Parameters and Defined Values
<class>: GPRS mobile class (in descending order of functionality)
"B" class B
"CG" class C in GPRS only mode
"CC" class C in circuit switched only mode (lowest)
14.1.4 Parameter Storage
The parameters are stored in EEPROM without using the AT&W command.