Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 75)

Global Configuration Commands
Wireless CPU ® Behaviour Configuration +WBHV
©Restricted Page: 69 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
Command Responses
AT+WBHV=3
Note: interrogate ENS feature mode
+WBHV: 3,1,1
OK
Note: Third parameter <1> indicates that a Wireless CPU ®
reset is needed
AT+WBHV? +WBHV: 0,1
+WBHV: 1,1
+WBHV: 2,1
+WBHV: 3,1,1
+WBHV: 4,0
+WBHV: 5,0
+WBHV: 6,20
OK
Note: Third parameter <1> indicates that a Wireless CPU ®
reset is needed)
AT+CFUN=1 OK
AT+WBHV=3 +WBHV: 3,1,0
OK
Note: Third parameter <0> indicates that a Wireless CPU ®
reset is not needed
AT+WBHV? +WBHV: 0,1
+WBHV: 1,1
+WBHV: 2,1
+WBHV: 3,1,0
+WBHV: 4,0
+WBHV: 5,0
+WBHV: 6,20
OK
Note: Third parameter <0> indicates that a Wireless CPU ®
reset is not needed
AT&F
Note: Restore factory
settings
OK