Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 71)

Global Configuration Commands
Wireless CPU ® Behaviour Configuration +WBHV
©Restricted Page: 65 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.5 Wireless CPU ® Behaviour Configuration +WBHV
6.5.1 Description
This Wavecom proprietary command allows the user to configure the behaviour of
the Wireless CPU ® .
6.5.2 Syntax
Action command
AT+WBHV=<parameter1>[,<parameter2>]
[+WBHV: <parameter1>,<parameter2>[,<resetFlag>]]
OK
Read command
AT+WBHV?
+WBHV: <parameter1>,<parameter2>[,<resetFlag>]
[+WBHV: <parameter1>,<parameter2>[,<resetFlag>][…]]
OK
Test command
AT+WBHV=?
+WBHV: <parameter1>,(list of supported <parameter2>s)
[,<resetFlag>]
[+WBHV: <parameter1>,(list of supported <parameter2>s)
[,<resetFlag>][…]]
OK