Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 614)

Audio Commands
Wavecom Change Default Player +WCDP
©Restricted
Page: 66 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
21.21 Wavecom Change Default Player +WCDP
21.21.1 Description
This Wavecom proprietary command allows the default melody player to be selected.
21.21.2 Syntax
Action command
AT+WCDP=<player>
OK
Read command
AT+WCDP?
+WCDP: <player>
OK
Test command
AT+WCDP=?
+WCDP: (list of supported <player>s)
OK
21.21.3 Parameters and Defined Values
<player>:
output selected to play the melody
0 buzzer (default value)
1 speaker
21.21.4 Parameter Storage
The <player> parameter is stored in EEPROM without using the AT&W.command
The default value can be restored using AT&F.