Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 671)

Fax Commands
Introduction
©Restricted
Page: 123 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
25 Fax Commands
25.1 Introduction
The fax service provided by the product is class 1 compliant. However, only the core
commands defined by ITU T.31 are supported. This means that commands such as
AT+FAR, +FCC, etc. are not supported.
Autobauding must be enabled to set up the product for fax.
All the following commands return an ERROR response code if they are not issued
during communication.