Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 95)

Global Configuration Commands
Save Configuration &W
©Restricted Page: 89 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.12 Save Configuration &W
6.12.1 Description
This command writes the active configuration into a non-volatile memory (EEPROM).
6.12.2 Syntax
Action command
AT&W
OK
Read command
None
Test command
None
6.12.3 Parameters and Defined Values
None.
6.12.4 Parameter Storage
None.
6.12.5 Examples
Command Responses
AT+IPR=9600
Note: Change data rate in memory only
OK
AT&W OK
AT+CFUN=1 OK
AT+IPR? +IPR: 9600
OK