Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 150)

Serial Port Commands
DCE Response Format V
©Restricted Page: 144 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
8.6 DCE Response Format V
8.6.1 Description
This command determines whether the DCE response format uses or not the header
characters <CR><LF>, and whether the result codes are provided as numeric or
verbose.
8.6.2 Syntax
Action command
ATV<n>
OK
Read command
None
Test command
None
8.6.3 Parameters and Defined Values
<n>: format control parameter
information responses result code
0 <text><CR><LF> <numeric code><CR>
1 (default
value)
<CR><LF>
<text><CR><LF>
<CR><LF>
<verbose code><CR><LF> .
8.6.4 Parameter Storage
The <n> parameter is stored in EEPROM using AT&W command. The default value
can be restored using AT&F.