Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 609)

Audio Commands
Ring Melody Playback +CRMP
©Restricted
Page: 61 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
21.19 Ring Melody Playback +CRMP
21.19.1 Description
This command associates a manufacturer defined melody to an incoming voice, data
or fax call. For incoming voice, data or fax calls, a choice of 10 melodies can be
played back and repeated.
For an incoming short message, 2 manufacturer-defined sounds can be played
(once). Melody #1: short beep / Melody #2: long beep.
21.19.2 Syntax
Action command
AT+CRMP=<call type>[,[<volume>][,[<type>][,<index>]]]
OK
Read command
AT+CRMP?
OK
Test command
AT+CRMP=?
+CRMP: (list of supported <call type>s),(list of supported
<volume>s),(list of supported <type>s),(list of supported
<index>s)
OK