Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 586)

Audio Commands
Audio Filter Command +WADF
©Restricted
Page: 38 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
Command Responses
AT+WADF=2,1
Note: Ask for the current params values of the high
pass filter in TX mode
+WADF: 1,1,9,8,7,6,5,4,3,2,1,0
OK
AT+WADF=1,1,,,,,,,,,,30
Note : Update <param10> of the high pass filter in
TX mode using the current <mode> value without
changing the others parameters
OK
AT+WADF=2,1
Note: Ask for the current params values of the high
pass filter in TX mode
+WADF: 1,1,9,8,7,6,5,4,3,2,1,30
OK
AT+WADF=0,1
Note: Stop the high pass filter in TX mode
OK