Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 329)

PLMN Commands
Operator Selection +COPS
©Restricted
Page: 139 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
Test command
AT+COPS=?
+COPS: [list of supported (<stat>,long alphanumeric <oper>,short
alphanumeric <oper>,numeric <oper>)s]
OK
15.2.3 Parameters and Defined Values
<mode>:
network registration mode
0 automatic (default value)
1 manual
2 deregistration; ME will be unregistered until <mode>=0 or 1
is selected
3 set only <format> (for read command AT+COPS?)
4 manual/automatic (<oper> shall be present), if manual
selection fails, automatic mode is entered.
<format>: format of <oper> field
0 long alphanumeric format <oper>
1 short alphanumeric format <oper>
2 numeric <oper> (default value)
<stat>: status of <oper> field
0 unknown
1 available
2 current
3 forbidden
<oper>: operator identifier (MCC/MNC in numeric format only for
operator selection)
The long alphanumeric format can be up to 16 characters long
(for operator names description see "Operator names" section in
the present document "Appendixes"; field is "Name"). The short
alphanumeric format can be up to 10 characters long.