Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 659)

CPHS Commands
CPHS Command: +CPHS
©Restricted
Page: 111 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
<VoiceMailStatus>: voice mail status
0 no message waiting
1 at least one message is waiting
<number>: phone number in ASCII format
string type
<type>: TON/NPI address byte
129 national number
145 international number
<name>: name of mailbox
string type
the +WPCS command affects the format of the mailbox
<name> entry
the maximum length is SIM dependent
<NumberStatus>: Indicates if <number> can be updated or not
0 update is not possible
1 update is possible
<DivertedStatus>: divert Call Status
0 disabled
1 enabled
<type format>: <operator name> format
0 long format (default value)
1 short format
<operator name>: operator name
string type
<data field>: CPHS information field bit number
range: 0-25 (default value if omitted: 0)
If <data field> field is equal to 0, the whole CPHS information
field will be displayed in <InfoStatus> parameter
Please refer to section “CPHS information field” in the
appendices