Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 406)

Short message Commands
Select Message Service +CSMS
©Restricted
Page: 60 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
17.1.3 Parameters and Defined Values
<service>: selected service
0 SMS AT commands are compatible with GSM 07.05 [1]
phase 2 version 4.7.0. (default value)
1 SMS AT commands are compatible with GSM 07.05 [1]
phase 2+ version.
<mt>: SMS-MT support
0 SMS-MT not supported
1 SMS-MT supported
<mo>: SMS-MO support
0 SMS-MO not supported
1 SMS-MO supported
<bm>: SMS-CB support
0 SMS-CB not supported
1 SMS-CB supported
17.1.4 Parameter Storage
The <service> parameter is stored in EEPROM using the AT&W command. The
default value can be restored using AT&F.
17.1.5 Examples
Command Responses
AT+CSMS=0
Note: SMS AT command phase 2 version 4.7.0
+CSMS: 1,1,1
OK
Note: SMS-MO, SMS-MT and SMS-CB supported
AT+CSMS?
Note: Get current values
+CSMS: 0,1,1,1
OK
AT+CSMS=?
Note: Possible services
+CSMS: (0,1)
OK