Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 76)

Global Configuration Commands
Wireless CPU ® Behaviour Configuration +WBHV
©Restricted Page: 70 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
Command Responses
AT+WBHV=3 +WBHV: 3,0,1
OK
Note: Third parameter <1> indicates that a Wireless CPU ®
reset is needed since ENS feature before AT&F was 1
AT+WBHV=4,1
Note: Enable mix tone with voice
OK
AT+WBHV=4
Note: Get mix tone with voice feature state
+WBHV: 4,1
OK
AT+WBHV=5,1
Note: Enable network registration denied
indication
OK
AT+WBHV=5
Note: Get network registration denied
indication feature state
+WBHV: 5,1
OK
AT+WBHV=6
Note: Get DTMF silent duration used to
separate DTMF during a DTMF decoding
+WBHV: 6,20
OK
AT+WBHV=6,30
Note: Set the duration used to separate DTMF
during a DTMF decoding to 300 ms
OK
AT+WBHV=6
Note: Get DTMF silent duration used to
separate DTMF during a DTMF decoding
+WBHV: 6,30
OK