Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 104)

Global Configuration Commands
Wavecom Custom Character Set +WCCS
©Restricted Page: 98 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.16.5 Examples
Command Responses
AT+WCCS=? +WCCS: (0-1),(0-2),(0-255),(0-255)
OK
AT+WCCS=0,0,120,130
Note: Display from character 120 to character
130 of the custom to GSM conversion table
+WCCS: 11, 78797A2020202020097E05
OK
Note: 11 characters displayed
AT+WCCS=1,0,115 >
20<ctrl-Z>
Note: Edit character 115 of the custom to GSM
conversion table
OK
Note: Edition successful
AT+WCCS=1,1,0,4 >
40A324A5E8<ctrl-Z>
Note: Edit the 5 first characters of the custom
alphabet table
OK
Note: Edition successful
AT+WCCS=0,1,1
Note: Display character 1 of the custom
alphabet table
+WCCS: 1,A3
OK
6.16.6 Notes
In edition mode, the session is terminated by <ctrl-Z>, or aborted by <ESC>. Only
hexadecimal characters ("0"…"9", "A"…"F") can be used. The number of characters
entered must be equal to the edition range requested, otherwise the command will
return "+CME ERROR: 24".
The default custom alphabet extension table contains the following extended
characters:
| ^ € { } [ ] ~ \