Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 63)

Global Configuration Commands
Automatic Boost Mode +WCPS
©Restricted Page: 57 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
6.3.3 Defined Values
<type>: Wireless CPU ® functionality
0 automatic boost mode
<mode>: requested operation
For <type> = 0
0 deactivate the automatic boost mode (default value)
1 activate the automatic boost mode
2 get the automatic boost mode state
<status>: current functionality status
For <type> = 0
0 automatic boost mode deactivated
1 automatic boost mode activated
6.3.4 Parameter storage
For each kind of <type> parameter, the <mode> parameter value is stored in
EEPROM without using AT&W. Default values can be restored using AT&F.