Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 208)

GSM Network Commands
Cell environment description +CCED
©Restricted
Page: 18 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
Command Responses
AT+CCED=1,8,1
Note: Request +CSQ response when the
<rssi> is changed (step = 1)
OK
+CSQ: 12,99
+CSQ: 13,99
AT+CCED=0,16
Note: idle mode
+CCED:
208,20,0006,0418,54,789,,,,255,,,0,20
8,20,0006,,57,1018,20,208,01,7500,649
7,17,55,17,208,10,54c4,f0ed,31,700,9,
208,20,0006,7d9a,50,1023,8,208,20,000
2,9a29,48,1015,7,1,1,1,2,1,2
OK
Note: 1,1,1,2,1,2 correspond to the Main Cell timing
Advance and 5 Neighbours timing Advance
AT+CCED=0,16
Note: dedicated mode
+CCED:
208,20,0006,0418,54,789,,19,19,,0,0,,
,,,,41,801,6,,,,,57,1018,20,,,,,48,10
15,10,,,,,57,1006,4,,,,,50,1023,7,,,,
,57,814,3,1,,,,,,
OK
Note: Neighbours timing Advance are not available in
dedicated mode
11.3.6 Notes
When automatic shots are selected, +CSQ responses are sent whenever the <rssi>
difference measured by the product is equal to or greater than the <CsqStep> value.
So, the <rssi> level between successive +CSQ responses is equal to or greater than
<CsqStep>.
Automatic shots are supported in idle mode and during communication.
Values of MCC/MNC are set to 0 in the case of "No service".