Example of a multiparty call, Appendixes, 5 example of a multiparty call – Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual

Page 730

Advertising
background image

APPENDIXES

Examples

© Restricted

Page:

24 / 80

This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.

WM_DEV_OAT_UGD_049 - 001

APPENDIXES

August 23,

2007

2.5 Example of a Multiparty Call

When the ME is powered on and the SIM PIN has been entered.
AT+CMEE=1

Enable the report mobile equipment errors

OK

AT+WIND=63

Ask to display the general indications

.

OK

AT+CCWA=1,1

Enable call waiting

.

OK

ATD>"John Panborn";

+WIND: 5,1

Indication of call

.

+WIND: 2

Remote party is ringing

.

OK

Call setup was successful

…Conversation (call1)…

+WIND: 5,2

Indication of another call

.

+CCWA: "+33595984834",145,"Dolores Claiborne"

Another call is waiting

.

AT+CHLD=2

Put first call on hold and answer the second one

.

OK

…Conversation (call2)…

AT+CHLD=3

Every call is part of a multiparty conversation

.

OK

AT+CHLD=11

Release the first call (with John Panborn) and recover the second call (with

Dolores Claiborne

)

…Conversation (call2)…

ATH

Release the second call

.

Advertising