Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 308)

GPRS Commands
Quality of Service Profile (Requested) +CGQREQ
©Restricted
Page: 118 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14.13 Quality of Service Profile (Requested) +CGQREQ
14.13.1 Description
This command allows the TE to specify a Quality of Service Profile that is used when
the MT sends an Activate PDP Context Request message to the network.
14.13.2 Syntax
Action command
AT+CGQREQ=[<cid>[,<precedence>[,<delay>[,<reliability>[,<peak>
[,<mean>]]]]]]
OK
Read command
AT+CGQREQ?
+CGQREQ: <cid>,<precedence>,<delay>,<reliability>,<peak>,<mean>
[+CGQREQ:
<cid>,<precedence>,<delay>,<reliability>,<peak>,<mean>[…]]
OK
Test command
AT+CGQREQ=?
+CGQREQ: <PDP_type>,(list of supported <precedence>s),(list of
supported <delay>s),(list of supported <reliability>s),(list of
supported <peak>s),(list of supported <mean>s)
[+CGQREQ: <PDP_type>,(list of supported <precedence>s),(list of
supported <delay>s),(list of supported <reliability>s),(list of
supported <peak>s),(list of supported <mean>s)[…]]
OK